Tuesday, May 12, 2020
My ES335 is a 33O?
Replacing Pickups in a Semi-Hollow Guitar ES 335 notes for my guitar
Rewiring a Semi-Hollow Guitar, Part One
Rewiring a Semi-Hollow Guitar, Part Two
Middle.....middle & Bridge
Down......Bridge.
ToneShaper Guitar Wiring Kit, for ES-335
Truss Rod Cover. For Gibson
Truss Rod Cover. For Gibson
Part 1- Reinstalling Semi-Hollowbody Electronics
Part 2- Reinstalling Semi-Hollowbody Electronics
Three pickups, obviously. There’s a Gibson ’57 in the neck position, a 500-T in the bridge position – it’s pretty loud. The middle pickup is a ’57 Plus. The way they’re wired is different from the way the original three-pickup Les Paul Customs were, but it’s the way my old guitar was wired. The middle pickup was always on with the originals – when you put the toggle switch all the way down, you couldn’t get just the bridge pickup, for example. I treated the guitar’s toggle switch like it works on a two-pickup model, and those two pickups use the top volume and tone knobs. The center pickup isn’t part of the switch at all, and is adjusted by the bottom volume and tone knobs; you blend it in. It’s always on, as was the case for the original three-pickups Customs, but you can turn just the middle pickup off by using the bottom volume control. Bringing it in gives the guitar a sort of a thick Strat sound, and of course, turning the top volume completely off, and having just the center pickup on means that it really sounds like a Strat.
The new signature model also doesn’t have pickup covers.
That’s because I took them off of the originals. In the old days, there was no Seymour Duncan company around, and pickups were pickups, generally on the quiet side. You took the pickup covers off to try to make them louder. People associate that cosmetically with my old guitar, so I went the same route.
Volume and Tone Controls Although we will be primarily discussing switching, let us first show 2 wiring diagrams of a guitar's volume and tone controls. The top diagram shows the way in which Fender wires its volume control. (This is the best way to wire a master volume control). Fender generally uses 250K "pots" and .02 mfd capacitors. The bottom diagram shows the wiring that Gibson uses for its volume controls. SPDT Switch Rewiring a guitar can dramatically change its sound. If you are unsure of basic switch terminology, please go to this tutorial first: Switches ALL SPDT switches have their common terminal in the middle and they ALL function as shown in the above diagram. In position 'A', the center terminal connects to the top terminal. In position 'B', the center terminal connects to the bottom terminal. These are called the "SPDT center on switch" (C) and the "SPDT center off switch" (D). These switches are called center on or off because this third switch position is located in between 'A' and 'B'. For example, if this were a toggle switch, this middle or 'center' position would occur when the switch lever was straight up. Even though these switches have 3 positions, they are still considered double throw because another 'throw' implies a connection to yet another terminal and as we can see, diagrams C & D have the same number of terminals as A & B. The best example of an "SPDT center on switch" is the pickup switch used on guitars with 2 pickups (the Gibson Les Paul™, the Gibson SG™, etc). Pictured above is the pickup switching diagram for a 2 pickup guitar. DPDT Switch In position 'A', the common terminals connect to the top terminals and in position 'B', they connect to the bottom terminals. Diagram C shows the middle position of the more common type of "DPDT center-on switch". Here the common terminals connect to the top and bottom terminals simultaneously. This is the typical DPDT center on switch that you would find at Radio Shack and most electronic parts suppliers. Diagram D shows the middle position of a highly specialized type of DPDT center-on switch. Here the common terminals connect as shown in the diagram. Now that you know about switches, let's talk very briefly about:
| |||||||||||||
Tuesday, February 9, 2016
Lawsuit ES-335 Gibson Like Guitar
Lawsuit Guitars, Gibson ES-330, 335, 345 and 355 Reproductions by Mann & Ibanez,
Alan’s Mann-
A702T Guitar
In 2014, I fulfilled a years old dream of owning a Gibson ES-355 TD Guitar, well sort of.
| Eric Clapton |
semi-hollow guitar that played louder, when not plugged into an amp, than my solid-body
guitars but not as loud as my acoustic guitar. Old memories
faded back to me and I decided I just had to have a Gibson 335.
| Gibson ES-335 |
for new strings and a tune-up.
| Alan's Mann Guitar |
I am not complaining, when I say that most of themetal parts on the guitar are pitted. I knew this before I purchased the guitar. The pitting does nothing to the overall pleasing sound the guitar produces. The pitting is to be expected for a guitar 40 years old. Truth be told, the guitar, even brand new, was marketed as a less expensive alternative to a Gibson. The guitar plays almost as good as a real Gibson, however the hardware is where the Japanese makers reduced the price of the guitar.
where the Mann Co, wholesaled thier guitars. There
were many guitar distributors selling the the same guitars under
different names or in the case of my guitar no name.
So what is a Lawsuit Guitar?
Sadly, at that time American guitar makers, like the auto
market of the same era, were cost cutting to make bigger profits thus producing
a poorer quality product than in years past.
The American youth market prompted corporations to venture into the market with a proven product. During this time, corporate owners of Gibson and Fender allowed their products to become, as I stated before, mediocre. That sad fact along with a lower cost helped youthful consumers to flock to and buy the new guitars from Japan. prohibitively expensive.
History of the Thinline Archtop Semi-Acoustic Electric Guitar
The world's first commercial thinline archtop semi-acoustic electric guitar was the Gibson ES-335. Gibson first sold the ES (Electric Spanish) series in 1958, it was neither hollow or solid. Gibson made the guitar by placing a solid maple wooden block through the center of the guitar’s body. The side "wings" are hollow, and the top had two violin-style F-holes over the hollow chambers.production since 1958 with only visible change being
to the markers on neck. The early models ES-335
had dots (hence named "dot neck") and later
models had blocks.
- ES-345: The ES-345 was first produced in 1958 as upscale version of ES-335. with a featured a multi-position "Varitone" switch.
- ES-355: The ES-355TD (Thinline semi-hollow, Double pickups) was at the top of Gibson's range of thinline semi-acoustic guitars. It was manufactured from 1958 until 1982, Rather than the rosewood fretboard on a 335 or 345, both variations of the 355 have an ebony fingerboard for a 'smoother' sound. The ES-355 was available with a Vibrola vibrato unit or a Bigsby vibrato tailpiece. It was also available with a stereo output and Varitone tone filter circuitry. When fitted with the optional stereo wiring and Varitone, the model was known as the ES-355TD-SV.
| Alex Lifeson of Rush playing an ES-355 |
- ES-330 TD: The ES-330 TD is a little different from the ES-335. The 330’s neck attaches at the 15th fret whereas the 335’s attaches at the 19th. The 330 is a thinline guitar that is neither a two thirds or a solid body guitar. It is a totally hollow-body. Gibson finally was able to design a hollow-body guitar without feedback issues with the 330. Therefor, the piece of feedback deadening wood is omitted from the body of the guitar. The 330 has dual cutaway pickups.
| Gibson Cherry-Dot SE-330-TD |











